Enabling Hybrid SLI
Enabling HybridPower
To enable HybridPower, the switches that control Hybrid SLI must be set to the
appropriate values in the System BIOS settings. Go into the system BIOS and go
to AdvancedChipset to ensure that the following settings are set to the values
given:
q Hybrid Support: ..........................Enabled
This enables hybrid functionality in the BIOS.
q Onboard or mGPU Enable:...........Enabled
When Hybrid is enabled, the Onboard GPU is automatically enabled.
q Preferred or Primary Boot GPU:..mGPU
This sets the primary display adapter. For HybridPower, this must be set to
mGPU.
q mGPU Frame Buffer Control:.......Manual
q mGPU Frame Buffer Size:............56 MB
The Frame Buffer size must be set to a minimum of 256MB for Hybrid SLI.
Note:
There may be differences in these menu items depending upon the manufacturer of
your motherboard.
Hybrid SLI Technology
65