Table of Contents
Advertisement
Welcome
12
Control Panel
Turns projector
Opens menu system
on and off
Indicate
projector
status
Searches for
source image
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
To receive an S-Video signal, you need an S-Video cable. One is
■
usually provided with your video device or you can purchase it
from Epson. See page 13.
To receive a component video signal from a VCR or other video
■
device, you need a D-sub, 15-pin, component-to-VGA video
cable, which is available from Epson. See page 13.
■
Some older PowerBooks and Macintosh desktop models may
need a Macintosh video adapter; see your computer dealer. Older
iMac systems may need a special adapter to provide a VGA output
port; see your computer dealer.
■
To receive an audio signal, you need a commercially available
audio cable; see your computer or electronics dealer.
Up/down arrows and
keystone correction
Left/right arrows
Automatically
and
adjusts computer
Volume down/up
images
Cancel/exit
Opens help
system
Advertisement
Table of Contents
