Product View And Part List - Craftsman 113.228000 Owner's Manual

getting to know your wood Jathe
13
SPEED
INDEX PIN
BELT GUARD
1 BELT GUARD
LOCK
7 HANDWHEEL
TAILSTOCK
11 spur RA.
CENTER 10 CUP C ENTE.
3
SPINDLE
LOCK 8 TAILSTOCK RAM
HOLE
TOOL REST
TOOL REST
BASE
BASE
)INDLE
\
BED
FOOT
TAILSTOCK
LOCK
12 TA,LSTOCK
TOOL REST
LOCK
4 TOOL REST
BRACKET LOCK
1. BELT GUARD LOCK... Locks the
hinged
part of the
guard during operation.
2. INDEX PIN...
Engages with the spindle pulley to
determine equal spacing for cuts for fluting or feeding,
or for dividing face plate work. DO NOT USE FOR
REMOVING FACEPLATES.
3. SPINDLE LOCK HOLE ... For
remov[ng
faceptatesor
sanding discs, insert a setscrew wrench, large nail or
bolt in the hole to hold the spindle while unscrewing
facepiate or sanding disc.
4. TOOL REST BRACKET LOCK... Clamps the tool
rest bracket to the bed.
5. TOOL REST LOCK... Clamp the too/rest to the tool
rest base.
6. TOOL REST BASE LOCK... Clamps the tool rest
base to the bed.
7. HANDWHEEL... Adjusts the tailstock ram,
8. TAILSTOCK RAM LOCK...
Clamps the ram in the
tai|stock.
9. TAILSTOCK LOCK...
Clamps the tailstock to the
bed.
10. ON-OFF SWITCH... Seepage 10.
13