Craftsman 113.228000 Owner's Manual page 17

11. Adjust the too! rest approximately I/8" away from
thecorners ofthewood and 1/8" above the center line.
Note the angled position of the toot rest base.
Lock the tool rest base and the tool rest.
TOOL R EST
1/8"
WOOD
Look at the speed chart. Notice that a 2" square
turning up to 18" tong should run at 875 R.P.M. for
"roughing". Move the V-belt on the pulleys to the
slowest speed.
Rotate the wood by hand to make sure that the corners
do not strike the toot rest,
17