Friction Wheel Adjustment - Sears Craftsman C950-52009-0 Owner's Manual

ADJ USTM ENT/RE PAlR
FRICTION WHEEL ADJUSTMENT
1. Remove bottom panels (Figure 30).
2. Position gear select lever in 1st forward gear.
3. Note position of friction wheel on disc drive plate. Proper
position from the right outer side of disc drive plate to the
centre of friction wheel must be 3" (76 mm) (see
Figure 31).
If adjustment is required, proceed as follows:
4. Loosen bolts in speed selector lever. (Figure 32).
5. Move friction wheel to proper position as indicated in step
3.
Remove Bolts
Loosen Bolts__
Figure 30
6. Replace bolts in speed selector lever.
7. Reinstall bottom panels.
Disc Drive Plate
,_ Figure 31
p .S veerd
I _/K}_ _F gure 32
F_01136J 26