Advertisement
Folding
Your
Workbench
1._Remove
any hand tools or parts from table top and
storage rack.
2_ Carefully
pull up on hinges, with fingers under
hinge flange, to unlock hinges.
3. qqtt Stand back slightly
onto rear legs. (See Figure
4.)
4. Reach down and push front legs backward.
Figure 4
Figure 5
Opening
the Workbench
1. Standing at rear of workbench, grasp front edge of
table top and underside of rear cross brace.
2, Pull rear cross brace towards you while
simultaneously pulling up on table top.
3. When fully open, secure in locked position by
pushing on hinges until completely down.
To Adjust
Table
Top
Jaw
Turn the front table top jaw adjustment
handles
counterclockwise
to move front jaw toward you. Turn
adjustment
handles
clockwise
to move front jaw
away. (See Figure 5.) The table top jaws open to
clamp a maximum
7-inch wide workpiece.
Adjusting
Jaw
to Angle
Workbench
jaw adjusts
to a maximum
angle of 14
degree s for clamping
irregular
shaped
workpieces.
To adjust jaw to angle,
turn either the right or left
djustment
handle
until desired
angle is reached.
Using Adjustable
Swivel
Pegs - Figure 6
"/our workbench is equipped with 4 swivel pegs. The
swivel pegs can be positioned into any of the holes in
the front and rear of top for gripping irregular shaped
workpieces, or to extend gripping and clamping when
the workpiece exceeds the jaw capacity.
CAUTION:
Swivel pegs are to be used to grip
workpiece
only in cases where
the workpiece
DOES
NOT extend
beyond
the surface
of the jaw.
Figure 6
Advertisement
