Craftsman EZ3 917.256710 Owner's Manual page 8

Table of Contents

Advertisement

ASSEMBLY
CONNECT
BATTERY
(See Fig. 2)
Lift hood to raised position.
Open terminal access doors, remove terminal protec-
tive caps and discard.
If this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery for minimum of one hour at 6-10 amps.
First connect RED battery cable to positive (+) battery
terminal with hex bolt, flat washer, lock washer and hex
nut as shown. Tighten securely.
Connect BLACK grounding cable to negative (-) battery
terminal with remaining
hex bolt, flat washer,
lock
washer and hex nut. Tighten securely.
Close terminal access doors.
Use terminal
access
doors for:
Inspection for secure connections
(to tighten hard-
ware).
Inspection for corrosion.
Testing battery.
Jumping (if required).
Periodic charging.
LOCK
FLAT
HEX NUT
WASHER
WASHER
DISCARD TERMINAL
HEX
PROTECTIVE
CAPS
BOLT
I'.
POSITIVE
(RED)
CABLE
NEGATIVE
(BLACK)
CABLE
I_STALL
SEAT (See Fig. 3)
_Adjust seat before tightening adjustment knob.
Remove cardboard packing on seat pan.
o
Place seat on seat pan and assemble shoulder bolt.
• ",
Assemble adjustment knob and flat washer loosely.
Do not tighten.
Tighten shoulder bolt securely.
Lower seat into operating position and sit on seat.
Slide seat until a comfortable position is reached which
allows you to press clutch/brake
pedal all the way
down.
Get off seat without moving its adjusted position.
Raise seat and tighten adjustment knob securely.
SEAT
SEAT PAN
SHOULDER
BOLT
ADJUSTMENT
KNOB
FIG. 3
FLAT WASHER
CHECK TIRE PRESSURE
The tires on your tractor were overinflated at the factory for
shipping purposes.
Correct tire pressure is important for
best cutting performance.
Reduce tire pressure to PSI shown in "PRODUCT
SPECIFICATIONS"
on page 3 of this manual.
CHECK BRAKE SYSTEM
After you learn how to operate your tractor, check to see
that the brake is properly adjusted.
See "TO ADJUST
BRAKE" in the Service and Adjustments
section of this
manual.
FIG. 2
8

Advertisement

Table of Contents
loading

Table of Contents