Craftsman 113.234650 Owner's Manual page 7

tools needed
Tools required for assembly and alignment:
• Medium Screwdriver
• #2 Phillips Screwdriver
• Combination Square
• '_ Box End/Open End Wrench or Socket
• 2 - ls/!6 Box End/Open End Wrenches or Adjustable
Wrenches or Socket Wrenches
• %6" Hex 't" Wrench
COMBINATION SQUARE MUST BE TRUE
DRAW LIGHT STRAIGHT EDGE OF
LINE ON BOARD BOARD 314" THICK
ALONG THIS EDGE-- C, ,m THIS EDGE MUST BE
"_.-'" "_)_:_ //PERFECTLY STRAIGHT
SHOULD BE NO GAP OR OVERLAP WHEN
SQUARE IS FLIPPED OVER IN DOTTED POSITION
MEDIUM SCREWDRIVER
#2 PHILLIPS SCREWDRIVER
iii:iIi;1111111;:]:]
COMBINATION SQUARE
5,46"HEX "1.:' WRENCH
....... _: _
1/2"WRENCH
W16" BOX END/OPEN END
WRENCHES
'/2" SOCKET
1%6" SOCKETS &
SOCKET WRENCHES
ADJUSTABLE WRENCH
c
=A-
/