Work Area Safety; Personal Safety - Craftsman 320.10870 Operator's Manual

SAFETY PRECAUTIONS FOR LASERS cont.
6. DO NOT use on surfaces such as sheet steel that have a shiny, reflective surface.
The shiny surface could reflect the beam back at the operator. Be aware that laser
light reflected off of a mirror or any other reflective surfaces can also be dangerous.
7. ALWAYS turn the laser beam off when not in use. Leaving the tool on increases
the risk of someone inadvertently staring into the laser's beam.
!i', CAUTION:
ALWAYS follow only the instructions contained in this manual
when using this laser. Use of this feature in any manner other than what appears
in this manual may result in a hazardous radiation exposure.
8o DO NOT attempt to modify the performance of this laser device in any way.
This may result in a dangerous exposure to laser radiation.
9. ALWAYS use only the accessories that are recommended by Sears for use
with this product. Use of accessories that have been designed for use with
other laser tools could result in serious injury.
10. For further information regarding lasers, refer to ANSI-Z136.l The STANDARD
FOR THE SAFE USE OF LASERS, available from the Laser Institute of America
(407) 380-1553.
WORK AREA SAFETY
1. Keep your work area clean and well lit. Cluttered workbenches and dark areas
invite accidents.
2. DO NOT operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children and visitors away while operating a power tool,
Distractions can cause you to lose control.
4, Make your workshop childproof with padlocks and master switches. Lock
tools away when not in use.
5. MAKE SURE the work area has ample lighting so you can see the work and that
there are no obstructions that wil! interfere with safe operation BEFORE using your saw
PERSONAL SAFETY
1, KNOW your power tool. Read the operator's manual carefully. Learn the saw's
applications and limitations, as well as the specific potential hazards related to this tool,,
2, STAY ALERT, watch what you are doing and use common sense when operating
a power tool.
3, DO NOT use tool while tired or under the influence of drugs, alcohol or medication,
A moment of inattention while operating power tools may result in serious personal injury,
4. DRESS properly. DO NOT wear loose clothing or jewelry. Pull back long hair, Keep
your hair, clothing, and gloves away from moving parts° Air vents often cover moving
parts and should also be avoided. Loose clothing, jewelry or long hair can be caught
in moving parts.
5