Acceleration Test - Craftsman EZ3 917.270670 Owner's Manual

ACCELERATION TEST
• Move throttle oontrol lever from slow to
fast position. If engine hesitates or
dies, turn idle mixture valve out
(counter-clockwise) 1/8 turn. Repeat
test and continue to adjust, if neces-
sary, until engine accelerates
smoothly.
High speed stop is factory adjusted. Do
not adjust--damage may result.
IMPORTANT; Never tamper with the
engine governor, which is factory set for
proper engine speed, overspeeding the
engine above the factory high speed
setting can be dangerous, if you think the
engine-governed high speed needs
adjusting, contact your nearest autho-
rized service center, which has proper
equipment to make any necessary
adjustments.
Idle Speed Throttle
Screw Lever
Idle Mixture
ValveWith
Limiter
26