Craftsman 113.179430 Owner's Manual page 8

EMPTYING THE DRUM
WARNING: TO AVOID INJURY FROM ACCIDENTAL
STARTING, UNPLUG POWER CORD BEFORE EMP-
TYING THE DRUM.
1. Remove top portion of the vac.
2, Dump the drum contents into the proper waste dis-
posal container. Dump drum contents opposite the
vacuum inlet to avoid spillage.
VACUUM
INLET
VACUUM
DRUM
WASTE DISPOSAL __
CONTAINER _'--_f
CORD USE iNSTRUCTIONS
This vac comes with a double-insulated motor which
allows the cord to plug in all receptacles. Be sure to
have cord pulled completely off the cord wrap in order
to vacuum maximurn area. If more cord is needed use
the proper gauge w!re extension cord.
CAUTION: Do not run over cord with vacuum nor
step on cord while vacuuming. This could cause
plug to be pulled from outlet causing electrical or
fire hazard.
CORD WRAP
The cord wrap provided on this vac enables you to
wrap the cord for easy storage when not in use,
MOVING THE MAC
1. To avoid dropping the vac due to latch release or
part breakage, pick the vac up by the lip of the dust
drum,
2, DO NOT pick the vac up by the lid handles. For short
transportation the cord wrap (not cord) can also be
used for carrying the vac when the drum is empty.
CAUTION: Do not use the cord wrap or handles for
carrying when vac contains debris Dr liquid be-
cause the weight may cause a separation of lid and
drum, which could cause part breakage. Instead,
roll the vac on it's casters or pick it up by the drum
lip,
CORD
CORD
WRAP
LID