Craftsman 917.257480 Owner's Manual page 23

TO REPLACE FUSE
Replace with 30 amp automotive-type plug-in fuse. The
fuse holder is Iocated in the engine compartment, directly
in front of the dash,
TO REPLACE
HEADLIGHT BULB
• Raise hood,_
• Pull bulb holder out of the hole in the backside of the
gdH1
• Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the grill.
• Close hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running or prevent it from starting.
• Check wiring See electrical wiring diagram in Repair
Parts section of this manual
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig's. 30 and 31)
Raise hood,
Unsnap headlight wire connector,
Stand in front of tractor, Grasp hood and lift off hinge
brackets,
To reinstall, reverse procedure°
FIG. 30
WIRE
CONNECTION
FIG. 31
23