Advertisement
CARRYING
HANDLE
See Figure 3.
For convenience when carrying or trensporting
your
cut-off machine from one place to another, a carrying
handle has been provided on top of the machine arm
as shown figure 3. To transport,
turn off and unplug
your machine, then lower machine arm and look it in
the down position. Lock machine arm by pushing in
arm lock lever.
LOCK-ON
BU'I-ION
See Figure 3.
Your cut-off machine is equipped with a lock-on
feature, which is convenient when continuous cutting
for extended periods o1' t ime is required. To engage
the lock-on feature, depress switch trigger, push in
and hold the lock-on button located on the side of the
handle, then release switch trigger. Release lock-on
button and machine wi{I continue running.
To release lock-on feature, depress switch trigger and
release.
If you have the lock-on feature engaged
during use
and your machine becomes disconnected from power
supply, disengage the lock-on feature immediately.
SPINDLE
LOCK
BU'FI'ON
A spindle lock button has been provided for locking
the spindle which keeps the wheel in your machine
from rotating. Depress and hold the spindle lock
button while installing,
changing, or removing wheel
only.
CARRYING HANDLE
SPINDLE
LOCK BuI'rON
UPPER
WHEELGUARD
TRIGGER
LOCK
See Figure 4.
To prevent unauthorizeduse of your cut-off machine,
we suggest that you disconnect it from the power
supply and lock the switch in the off position.To lock
the switch,install e padlock (not included)through the
hole in the switch trigger. A lock with a shackle up to
9/32 in, diameter may be used. When the lock is
installedand locked, the switch is ino'l_bra.ble. Store
the padlock key in another location.
PADLOCK
Fig, 4
LOCK-ON
BUTTON
MACHINEARM
ARM
LEVER
WRENCH
POWERCOHD
SWRCHTRIGGER
LOWER
14in.(356mm)
ABRASWEWHEEL
OUICK LOCK-
RELEASE LEVER
Bmm
HEXKEY
RUBBER FEET
FENCE
LOCK HANDLE
ADJUSTABLE
FUP FENCE
ASSEMBLY
VISE CLAMP
MACHINE BASE
_SECRANK
HANDLE
Fig, 3
9
Advertisement
