Advertisement
QUICK LOCK-RELEASE
LEVER
See Figures 9 and 10.
The quiok lock-re[ease lever engages the vise olamp
to be used along with the fence assembly to provide a
vise for securing the workplace to be cut. It also
allows you to open and close the vise quickly without
repetitive turning of the vise crank handle.
USING
THE QUICK
LOCK-RELEASE
LEVER
AND VISE CLAMP
To loosen;
See Figure 9.
•
Unplug your cut-off rcaohine.
,_
WARNING:
Failure to unplugcut-off machine
could result in accidental starting causing
possible serious personal injury,
•
Release tension on the vise clamp by rotatingthe
vise crank handle 1/2 to 1 turn counterclockwise.
•
Lilt up the quick lock-release lever as shown in
figure 9 and pull back on vise crank handle to slide
open the vise.
To tighten:
See Figure 10.
• Unplug your cut-off machine.
_1_ WARNING:
Failure to unplug cut-off machine
could result in accidentat starting causing
poss(ble serious persona[ injury.
•
Push the vise crank handle forward to slide the
vise clamp against the workpiece.
•
Rotate the quick lock-release
lever forward and
push down as shown in figure 10 to engage its
threads with _e vise screw.
•
Rotate the vise crank handle clockwise to tighten
the vise clamp against the work, p iece,
_SE
CLAMP
VISE
CLAMP
QUICK LOC_RELEASELEVER
WlTHTHREAD5 NOT ENGAGED
V_ECRANK
HANDLE
Fig. 9
_SE CRANK
HANDLE
USE
SCREW
QUICK LOC_RELEASE LEVER
WITHTHREADSENGAGED
Fig. 10
12
Advertisement
