Table of Contents
Advertisement
BOSSTX2 CE 5.0 User's Manual
The "Dialing Patterns..." dialog lets you configure the settings shown as below.
Once everything is correctly set up, click on Connect on Dial-up Connection dialog. The target and host should now be
connected. You should see connection icons in the status bars of your host and target. Once the PPP Dial-Up is connected
successfully, then press the Hot-keys "Ctrl +Alt + End " to back to the "Terminal Connection Manager "and double click on
RDP or ICA for connection.
4.6.2
Direct Connection
4.6.2.1 Make a New Direct Connection
In the Make New Connection dialog select Direct Connection radio button. Then click on "Next".
Direct Connection
The Make New Direct Connection dialog should now appear. Select the serial connection for the current COM port being
used for the connection. Then click on "Configure" and click on "TCP /IP Setting" .The setting of "Configure" and "TCP/IP
Setting" are the same as stated in the Make New Dial-Up Connection above.
Click on "Finish" once the "Configure" , "TCP /IP Settings" and "Security Settings" have been completed. Then you will go
back to the Configure entry of Terminal Connection Manager.
41
Advertisement
Table of Contents
