Local Printer Setup; Select The Printer Port - Bosslan Windows-Based Terminal BOSSTX2 CE 5.0 User Manual

BOSSTX2 CE 5.0 User's Manual

3.2.4 Local Printer Setup

The terminal supports Local Print. If you want to connect this terminal with a Local Printer, then click OPEN. If not, then click
NEXT.
Local Printer Setup
After click OPEN you can see the Add Printer page then click OPEN again you can see the Select the printer Port page.

3.2.5 Select the Printer Port

Select one of the ports, LPT1, COM1 or COM2 port that you want to use to communicate with your local printer. Or you can
select Network to set a network printer. When you select the COM1 or COM2 .You can also select the baud rate of COM1 or
COM2 port.
Select the Printer Port
14