Bosslan Windows-Based Terminal BOSSTX2 CE 5.0 User Manual page 29

BOSSTX2 CE 5.0 User's Manual
Click on Desktop if you want the Windows NT desktop displayed by default while connecting. Or click on Application file
name and type its name when you want to start this application while connecting. You can also specify a working directory
when you specify an application. If default the connection bar is enable. The connection bar will be showed on the
Windows desktop. If it is disable. The connection bar will be hided.
After finish the setup then you can see the new connection name show in the dialog box.
And Click Edit if you want to edit the RDP. The screen will go back to Select the Connection Name as shown on page 21,
then follow the setup procedures again after selecting the connection.
24