Integrated Peripherals - Gigabyte GA-MA790GP-UD3H User Manual

Am2+/am2 socket motherboard for amd phenom ii x4 processor/amd phenom ii x3 processor/ amdphenom fxprocessor/amdphenom x4processor/ amdphenom x3processor/amdathlon x2processor/ amdathlon processor/amdsempron x2processor/ amdsempron processor
Table of Contents

Advertisement

2-6

Integrated Peripherals

OnChip IDE Channel
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
Onboard Audio Function
Onboard 1394 Function
Onboard LAN Function
 SMART LAN
Onboard LAN Boot ROM
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard Serial Port 1
: Move
Enter: Select
F5: Previous Values
OnChip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
OnChip SATA Controller
Enables or disables the integrated SATA controller. (Default: Enabled)
OnChip SATA Type (SATA2_0~SATA2_3 connectors)
Configures the operating mode of the integrated SATA controller.
Native IDE
RAID
AHCI
OnChip SATA Port4/5 Mode (SATA2_4/SATA2_5 connectors)
Configures the operating mode of the integrated SATA2_4/SATA2_5 connectors.
IDE
As SATA Type
Onboard Audio Function
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item
to Disabled.
Onboard 1394 Function
Enables or disables the onboard IEEE 1394 function. (Default: Enabled)
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Allows the SATA controller to operate in Native IDE mode. (Default)
Set this option to Native IDE if you wish to install operating systems that
support Native mode, e.g. Windows XP.
Enables RAID for the SATA controller.
Configures the SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing
and hot plug.
Disables RAID for the SATA controller and configures the SATA controller to
PATA mode. (Default)
The mode depends on the OnChip SATA Type settings.
[Enabled]
[Enabled]
[Native IDE]
IDE
[Enabled]
[Enabled]
[Enabled]
[Press Enter]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
F10: Save
- 49 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Advertisement

Table of Contents
loading

Table of Contents