Gigabyte GA-MA790GP-UD3H User Manual page 40

Advanced Clock Calibratioin
EC Firmware Selection
Advanced Clock Calibratioin
x Value (All Cores)
x Value (Core 0)
x Value (Core 1)
x Value (Core 2)
x Value (Core 3)
: Move
Enter: Select
F5: Previous Values
EC Firmware Selection
Allows you to select the EC firmware version when Advanced Clock Calibration is enabled.
After the selection, select Save & Exit Setup in the BIOS Main Menu and then press Y. A message
which says "BIOS Is Updating EC Firmware!!! Don't Turn Off Or Reset System" will appear.
Wait for a few seconds and the system will automatically restart for the settings to take effect.
Normal
Hybrid
Advanced Clock Calibration
Allows you to determine whether to enable Advanced Clock Calibration when using an AMD Black
Edition CPU.
Disabled
Auto
All Cores
Per Core
Value (All Cores)
This option is configurable only when Advanced Clock Calibration is set to All Cores.
Options are: -12%~+12%.
Value (Core 0), Value (Core 1), Value (Core 2), Value (Core 3)
This option is configurable only when Advanced Clock Calibration is set to Per Core.
Options are: -12%~+12%.
HT Link Frequency
Allows you to manually set the frequency for the HT Link between the CPU and chipset.
Auto
200 MHz~1 GHz
(Note) This item is present only if you install a CPU that supports this feature.
GA-MA790GP-UD3H Motherboard
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Clock Calibratioin
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Uses the standard AMD EC firmware version. (Default)
Uses the specific AMD EC firmware version.
Disables this function. (Default)
Lets the BIOS to configure the settings to defaults.
Configures Advanced Clock Calibration for all CPU cores.
Individually configures Advanced Clock Calibration for each CPU core.
BIOS will automatically adjust the HT Link frequency. (Default)
Sets HT Link Frequency to 200 MHz~1 GHz.
[Normal]
[Disabled]
-2%
-2%
-2%
-2%
-2%
F10: Save
- 40 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults