AHCI
Configures the SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing and
hot plug.
RAID
Enables RAID for the SATA controller.
Onboard Audio Function
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item
to Disabled.
Onboard LAN device
Green LAN
Onboard LAN1 Function
Onboard LAN1 Boot ROM
SMART LAN1
Onboard LAN2 Function
Onboard LAN2 Boot ROM
SMART LAN2
: Move
Enter: Select
F5: Previous Values
Green LAN
When the onboard LAN function and Green LAN are enabed, the system will dynamically detects
if a LAN cable is connected or not. If not, the corresponding LAN controller will be disabled
automatically. (Default: Disabled)
Onboard LAN1/2 Function (LAN1/2 Port)
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item
to Disabled.
Onboard LAN1/2 Boot ROM (LAN1/2 Port)
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip.
(Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Onboard LAN device
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Disabled]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Disabled]
[Press Enter]
F10: Save
- 51 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup