Onboard Audio Function - Gigabyte GA-78LMT-USB3 User Manual

& OnChip SATA Port as ESP
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Port0 as ESP
Port1 as ESP
Port2 as ESP
Port3 as ESP
x Port4 as ESP
x Port5 as ESP
: Move Enter: Select
F5: Previous Values
& Port0 as ESP/Port1 as ESP/Port2 as ESP/Port3 as ESP
This option is configurable only when OnChip SATA Type is set to AHCI. Enabled will speed up the hot
plug detection of the connected SATA device. (Default: Disabled)
& Port4 as ESP/Port5 as ESP
This option is configurable only when OnChip SATA Type is set to AHCI and OnChip SATA Type Port4/5
is set to As SATA Type. Enabled will speed up the hot plug detection of the connected SATA device.
(Default: Disabled)
& Onboard LAN Function
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Onboard LAN Boot ROM
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default:
Disabled)
& SMART LAN (LAN Cable Diagnostic Function)
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Start detecting at Port.....
Part1-2 Status = Open / Length =
Part3-6 Status = Open / Length =
Part4-5 Status = Open / Length =
Part7-8 Status = Open / Length =
: Move Enter: Select
F5: Previous Values
This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN cable.
This feature will detect cabling issue and report the approximate distance to the fault or short.
& Onboard Audio Function
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& F_USB30 Controller (Etron EJ168 USB Controller, USB 3.0/2.0 ports routed to the
onboard F_USB30 header)
Enables or disables the Etron EJ168 USB controller. (Default: Enabled)
OnChip SATA Port as ESP
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Disabled
Disabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
SMART LAN
0m
0m
0m
0m
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 33 -
Item Help
Menu Level ``
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level ``
ESC: Exit F1: General Help
F7: Optimized Defaults