Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-MA785G-UD3H User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

 Advanced Clock Calibration
 DRAM Configuration
HT Link Frequency
VGA Core Clock control
x VGA Core Clock(MHz)
EPP Mode
(Note 2)
x EPP Voltage Control
CPU Clock Ratio
CPU NorthBridge Freq.
CPU Host Clock Control
x CPU Frequency(MHz)
PCIE Clock(MHz)
Set Memory Clock
x Memory Clock
DCTs Mode
******** System Voltage Optimized ********
System Voltage Control
x DDR2 Voltage Control
x NorthBridge Volt Control
higf : Move Enter: Select
F5: Previous Values
x SouthBridge Volt Control
x CPU NB VID Control
x CPU Voltage Control
Normal CPU Vcore
higf : Move Enter: Select
F5: Previous Values
• Whether the system will work stably with the overclock/overvoltage settings you made is depen-
dent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in
damage to CPU, chipset, or memory and reduce the useful life of these components. This page is
for advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set the
System Voltage Control item to Auto to optimize the system voltage settings.
(Note 1) This item appears only if you install a CPU that supports this feature.
(Note 2) This item appears only if you install a memory module that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
(Note 1)
(Note 2)
(Note 1)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
(Note 1)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Press Enter]
[Press Enter]
[Auto]
[Disabled]
500
[Disabled]
Normal
[Auto]
[Auto]
[Auto]
200
[Auto]
[Auto]
x4.00 800Mhz
[Unganged]
[Auto]
Auto
Auto
F10: Save
Auto
Auto
Auto
1.3250V
F10: Save
- 39 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup