Advanced Bios Features - Gigabyte GA-MA785G-UD3H User Manual

2-5

Advanced BIOS Features

Internal Graphics Mode
UMA Frame Buffer Size
x Surround View
Onboard VGA output connect
Init Display First
AMD C1E Support
Virtualization
AMD K8 Cool&Quiet control
 Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Away Mode
Full Screen LOGO Show
Backup BIOS Image to HDD
higf : Move Enter: Select
F5: Previous Values
Internal Graphics Mode
Allows you to determine whether to allocate system memory for the onboard graphics controller.
Disabled
UMA
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB,
256MB, 512MB.
Surround View
Enables or disables the Surround View function. This option is configurable only if an ATI graphics card
is installed. (Default: Disabled)
Onboard VGA output connect
Specifies the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI.
Auto
D-SUB/DVI
D-SUB/HDMI
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express
graphics card, or the onboard VGA.
PCI Slot
OnChipVGA
PEG
PEG1
(Note) This item appears only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced BIOS Features
(Note)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables the onboard graphics controller.
Allocates memory for the onboard graphics controller from the system memory.
(Default)
Lets the BIOS automatically determines the primary display port for output,
depending on to which port the display device is connected, D-SUB/DVI-D or
D-SUB/HDMI. (Default)
Sets the D-SUB/DVI-D as the graphics display.
Sets the D-SUB/HDMI as the graphics display.
Sets the PCI graphics card as the first display.(Default)
Sets the onboard VGA as the first display.
Sets the PCI Express graphics card on the PCIEX16_1 slot as the first display.
Sets the PCI Express graphics card on the PCIEX4_1 slot as the first display.
[UMA]
[Auto]
Disabled
[Auto]
[PCI Slot]
[Disabled]
[Disabled]
[Auto]
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
F10: Save
- 47 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup