Gigabyte GA-MA785G-UD3H User Manual page 53

PME Event Wake Up
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a PCI or PCIe de-
vice. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
(Default: Enabled)
HPET Support
Enables or disables High Precision Event Timer (HPET) for Windows Vista operating system.
(Default: Enabled)
Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled
Double Click
Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled
Password
Any KEY
Keyboard 98
KB Power ON Password
Set the password when Power On by Keyboard is set to Password. Press <Enter> on this item and set
a password with up to 5 characters and then press <Enter> to accept. To turn on the system, enter the
password and press <Enter>.
Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <En-
ter> again without entering the password to clear the password settings.
AC Back Function
Determines the state of the system after the return of power from an AC power loss.
Soft-Off
Full-On
Memory
Power-On by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Date (of Month) Alarm: Turn on the system at a specific time on each day or on a specific day in a
month.
Resume Time (hh: mm: ss): Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
(Note) Supported on Windows Vista operating system only.
(Note)
Disables this function. (Default)
Double click on left button on the PS/2 mouse to turn on the system.
Disables this function. (Default)
Set a password with 1~5 characters to turn on the system.
Press any key on the keyboard to turn on the system.
Press POWER button on the Windows 98 keyboard to turn on the system.
The system stays off upon the return of the AC power. (Default)
The system is turned on upon the return of the AC power.
The system returns to its last known awake state upon the return of the AC power.
- 53 - BIOS Setup