Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-MA770-ES3 User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

 Advanced Clock Calibration
CPU Clock Ratio
CPU NorthBridge Freq.
CPU Host Clock Control
x CPU Frequency(MHz)
PCIE Clock(MHz)
HT Link Frequency
Set Memory Clock
x Memory Clock
 DRAM Configuration
******** System Voltage Optimized ********
System Voltage Control
x DRAM Voltage Control
x NB Voltage Control
x SB/HT Voltage Control
x CPU NB VID Control
x CPU Voltage Control
Normal CPU Vcore
higf : Move Enter: Select
F5: Previous Values
• Whether the system will work stably with the overclock/overvoltage settings you made is depen-
dent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in
damage to CPU, chipset, or memory and reduce the useful life of these components. This page is
for advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set the
System Voltage Control item to Auto to optimize the system voltage settings.
Advanced Clock Calibration
EC Firmware Selection
Advanced Clock Calibration
x Value (All Cores)
x Value (Core 0)
x Value (Core 1)
x Value (Core 2)
x Value (Core 3)
higf : Move Enter: Select
F5: Previous Values
(Note) This item appears only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
(Note)
(Note)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Clock Calibration
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Press Enter]
[Auto]
[Auto]
[Auto]
200
[Auto]
[Auto]
[Auto]
x2.66 533Mhz
[Press Enter]
[Auto]
Auto
Auto
Auto
Auto
Auto
1.3250V
F10: Save
[Normal]
[Disabled]
-2%
-2%
-2%
-2%
-2%
F10: Save
- 35 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup