Chapter 2 Before Setting Up; Connecting The Ac Adapter To The Printer - Epson TM-U300A Operator's Manual

Chapter 2 Before Setting Up

2-1

Connecting the AC Adapter to the Printer

n Plugging in AC adapter
CAUTIONS:
voltage and power specifications match the printer's requirements.
Connect the AC adapter according to the following procedure.
Make sure the printer is turned off.
Plug the power cable connector into the printer's power connector with the ar-
row mark facing upward. (You can remove the power cable by grasping the
connector firmly at the arrow mark and pulling straight out.)
Frame
Plug the power cord into the outlet, and turn on the power.
Be sure to ground the printer with the frame ground screw on the board at the
rear side of the unit via a F.G cable.
ower Connector ower Connector
5