Mounting And Assembly Tool Rest - Craftsman 113.228360 Owner's Manual

_,. ,, -_ i, HI, H , iHl,,
TOOL REST SLIDE LOCK
TOOL REST SLIDE
MOUNTING AND ASSEMBLING
TOOL REST ASSEMBLY
1. From the loose parts find the tool rest slide and tool
rest slide lock. The shape and appearance of toot
rest slide lock is as shown in illustration,
Slide the tool rest slide onto right end of lathe bed.
Screw tool slide lock into tool rest slide (as shown)
until tight.
TOOL REST
SLIDE LOCK
BED
TOOL REST
SLIDE LOCK
2. Fromthe loose parts, locate a .380 x 1-9/16 x 7/64
flat washer {see illustration), toolrest holder and tool
rest holder lock. The appearance and shape of the
tool rest holder lock and flat washer are shown in
illustration. Attach tool rest holder and flat washer
to tool rest slide as shown,
TOOL
REST HOLDER
LOCK
FLAT
WASHER
•14
,380 X 1-9/64 X 7/64 FLAT WASHER
TOOL
SLIDE
\
BED
• fl •
/