Advertisement
[]
Repeatstep 8 (A) to assemblethe left fasciato the sideburnershelf. Installthesideburnershelf ontothe factoryinstalledscrews
locatedon the left side of firebox(A).
[] Tightenthepre-installed screwssecurely. Theninstall two additional1/4-20x1/2"screws in upperholesof the sideshelf
mountingbrackets. Attachleft fasciato control panelwith #10-24x1/2"screws (B).
[]
Position valve behindfasciaand line up holes. Insert(1) of the#8-32x3/8"screws, but do not fully tighten. Slip bezelunder
insertedscrewand positionas shown. Lineup other holeand insert (1) #8-32x3/8"screw throughbezeland intovalve.Tighten
bothsecurely.
[]
Removescrewsfrom bottomof sideburner. Installburnerintoside shelf(D)/(E). IMPORTANT: Makesure valveis inside
sideburnertube. Securesideburnerwith the hardwarepreviouslyremoved.Attachsideburnerignitorwire to electrodeas shown
(E).
Qty: 2
Qty: 5
Qty: 2
1/4-20x1/2"
#10-24x1/2"
#8-32x3/8"
Machine Screw
MachineScrew
MachineScrew
Qty: 3
#10 24 Hex Nut
A
B
C
ControlKnobBezel
-,...
Valve
E
22
Sideburner Valve
SidebumerIgnitorWire
Valve
Advertisement
