Xerox EX7750 Quick Start Manual page 14

6 Quick Start Guide
Unpacking the EX7750 and the printer
The EX7750 is assembled and shipped from the factory in a box that includes all
necessary cables and documentation. See the following procedures for information
about unpacking the EX7750. You will also need to unpack the printer and prepare it;
for more information, see the Xerox Setup Guide.
T EX7750
O UNPACK THE
1. Open the box and remove the packing material.
Save the original boxes and packing material in case you need to transport the EX7750
at a later date.
2. Remove the contents from the top container. Inspect the contents for visible damage.
The top container should include the following items:
• Bags containing one Ethernet Crossover cable and one AC power cable
• Media package (includes CDs for system software, user software, and user
documentation)
3. Set aside the media package and the remaining components from the top container.
In order to take full advantage of the EX7750, the user software must be installed on
client workstation computers that will print to the EX7750.
4. Remove the top container and any packing materials.
Set aside the packing material and note the orientation of the EX7750 inside the
shipping container, in case you need to repack it later.
5. Carefully lift the EX7750 out of the box.
If you notice shipping damage to any component, save the shipping container in case
the carrier needs to see it. Call the carrier immediately to report the damage and file a
claim.