Using Calibrator; Starting Calibrator - Xerox Phaser EX7750 Color Manual

2
2-6 Color Calibration

Using Calibrator

ColorWise Pro Tools Calibrator allows you to calibrate the EX7750 using the
measurement method of your choice.
Changing the calibration has the potential to affect all jobs for all users, so consider
limiting the number of people authorized to perform calibration. Set an Administrator
password to control access to calibration (see the
Multiple users can be connected to one EX7750 with ColorWise Pro Tools, but
N :
OTE
only one user at a time can use Calibrator. An error message appears if you try to
calibrate when another user is using ColorWise Pro Tools to calibrate.

Starting Calibrator

Start Calibrator from the ColorWise Pro Tools main window.
T EX7750
O CALIBRATE THE
1. Start ColorWise Pro Tools and connect to the EX7750.
For instructions on configuring the connection to the EX7750, see the
Installation Guide.
If the connection to the EX7750 from Command WorkStation/Command
N :
OTE
WorkStation LE (which also allows for access to ColorWise Pro Tools) is not
established, you can start ColorWise Pro Tools independently of Command
WorkStation/Command WorkStation LE.
C
USING ALIBRATOR
Configuration Guide).
User Software