4
Load paper
Sheet feeder
You can load plain paper, and most glossy and matte papers, in the
sheet feeder.
1
Open the paper support and pull up the extensions.
2
Open the output tray and pull out the extensions.
3
Load paper against the right edge and behind the tab. Then squeeze
the edge guide and slide it to the edge of the paper.
Note: Don't load the paper sideways. Always
load it short edge first.
Rear Manual feed slot
You can print on these paper types using the single sheet guide and the
rear manual feed slot:
•
Epson Velvet Fine Art Paper
•
Epson Watercolor Paper Radiant White
•
Epson UltraSmooth
•
PremierArt
™
Matte Scrapbook Photo Paper for Epson
•
Epson Exhibition Fiber Paper
1
Remove any paper from the sheet feeder and close the paper support.
2
Make sure the output tray is open and the extensions are pulled out.
®
Fine Art Paper 325 gsm