Using The Fs01 - Zoom Pro 4040 Operation Manual

Application Examples for Use of the Foot Switch and Pedal Switches 1 - 4
The optional foot switch FS01 can be used for example to switch modes during a performance.

Using the FS01

The optional foot switch FS01 can be used to switch
between the normal Play mode and the Manual mode where
effects can be individually switched on and off.
• Turn off the 4040, and connect the FS01 to the
MANUAL connector of the 4040.
MANUAL
FS01
• Turn on the 4040 and select the patch.
• Push the FS01 once.
This switches the 4040 to the Manual (Edit) mode. The
on/off status of individual effect modules can now be
controlled with the pedal switches 1 - 4 and the BANK
pedal.
The pedal switches 1 - 4 and the BANK
HINT
correspond to the following effect modules:
• BANK pedal :
• Pedal switch 1:
• Pedal switch 2:
• Pedal switch 3:
• Pedal switch 4:
In Manual mode, selecting patches is not possible.
NOTE
• Push the FS01 once more.
The 4040 reverts to the normal Play mode, and patch
selection is possible.
INPUT
4040
PRE
EQ
MODULATION
DELAY
REVERB
pedal
27