Zoom Pro 4040 Operation Manual page 19

PHA (Phase)
4
This effect adds a phase-shifted component to the direct
sound, with a variable amount of phase shift. The effect
creates a warm, distinct sound that is different from flanger
or chorus.
MODULATION
Parameter 1 DEPTH
Parameter 2 RATE
Parameter 3 PEAK
Parameter 4 MODE
Parameter 5 EXP. MODE
Explanation
(1)DEPTH: Determines the depth of phase shift.
(2)RATE: Determines the speed of phase shift.
(3)PEAK: Adds a distinct character to the sound by
emphasizing the effect.
(4)MODE: Determines the basic sonic character.
0: Warm
1: Clear
(5)EXP. MODE (Expression Mode): Determines the
direction of the change caused by the EXP pedal.
0: When the pedal is fully pushed down, the sonic
change is as set with the PEAK parameter. When the
pedal is up, the sonic change is minimum.
1: When the pedal is fully pushed down, the sonic
change is maximum. When the pedal is up, the sonic
change is as set with the PEAK parameter.
5 TRM (Tremolo)
This effect periodically varies the intensity of the sound. The
effect can be adjusted from conventional tremolo to a strong
clipping effect.
MODULATION
Parameter 1 DEPTH
Parameter 2 RATE
Parameter 3 PEAK
Parameter 4 MODE
Parameter 5 EXP. MODE
Explanation
(1)DEPTH: Determines the depth of the tremolo effect.
(2)RATE: Determines the speed of the tremolo variation.
18
4 PHA
0 – 10
1 – 50
0 – 10
0 , 1
0 , 1
5 TRM
0 – 10
1 – 50
0 – 10
0 , 1
0 , 1
(3)PEAK: Increasing this parameter deforms the tremolo
waveform to a trapezoid shape, which causes a strong
clipping effect and adds a distinct character to the sound.
(4)MODE: Determines the modulation waveform.
0: Chopping 1: Sawtooth
(5)EXP. MODE (Expression Mode): Determines the
direction of the change caused by the EXP pedal.
0: When the pedal is fully pushed down, the tremolo rate
is as set with the RATE parameter. When the pedal is up,
the tremolo rate is minimum.
1: When the pedal is fully pushed down, the tremolo rate
is maximum. When the pedal is up, the tremolo rate is as
set with the RATE parameter.
Level
PEAK=0
Effect of the PEAK Parameter
STEP
6
This effect causes random pitch changes and creates an auto
arpeggio sound.
MODULATION
Parameter 1 DEPTH
Parameter 2 RATE
Parameter 3 PEAK
Parameter 4 MODE
Parameter 5 EXP. MODE
Explanation
(1)DEPTH: Determines the depth of the pitch change.
(2)RATE: Determines the speed of the effect (arpeggio rate)
(3)PEAK: Determines the amount of feedback. Increasing
this parameter stresses the feeling of modulation and
adds a distinct character to the sound.
(4)MODE: Determines whether there is a portamento effect
when changing the pitch.
0: Effect disabled 1: Effect enabled
(5)EXP. MODE (Expression Mode): Determines the
direction of the change caused by the EXP pedal.
0: When the pedal is fully pushed down, the feedback is
as set with the PEAK parameter. When the pedal is up,
the feedback is minimum.
1: When the pedal is fully pushed down, the feedback is
maximum. When the pedal is up, the feedback is as set
with the PEAK parameter.
Level
Time
PEAK=10
6 STEP
0 – 10
1 – 50
0 – 10
0 , 1
0 , 1
Time