Table of Contents
Advertisement
01,
Power (Command:
k a)
To control
Power On/Off
of the TV.
Transmission[k]
[a] []
[Set !D] []
[Data] [Cr]
Data 00: Power Off
Data 01 : Power On
Acknowledgement[a][]
[Set ID] [ ] [OKiNG]
[Data] [x]
* Note: The TV will send the acknowledgment
after the
power on processing is completed.
There might be a time delay between command and
acknowledge.
02, input
Select
(Command:
x b)
To select the input source for the TV.
TransmisSiOn[x] [b] [] [set ID] [] [Data] [Cr]
Data 10: TV
Data 20:AV1
Data 40: Component
1
Data 60: RGB-PC
Data 91:HDMI2
Data 21 : AV2
Data 41: Component
2
Data 90:HDMI1
Data 92:HDMI3
Acknowledgement[b][
][Set
ID][
][OK/NG]
[Data] [x]
03, Aspect
Ratio (Command:
k c)
To adjust the screen format.
Transmission [k] [€][]
[set ID][]
[Data] [Cr]
Data 01 : 4:3
05: Zoom 2
02:16:9
06: Set by program
04: Zoom 1
09: Just scan
Reserved
Acknowledgemen_ [c] [ ] [set ID] [ ] [OKiNG]
[Data] [x]
04,
Screen Mute
(Command:
k d)
To select screen mute on/off.
TransmiSSiOn[k] [d] []
[Set ID] [ ] [Data] [Cr]
Data 00:
Screen mute off (Picture on)
Data 01 : Screen mute on (Picture off)
ACknowledgement [d][
][set
ID][
][OKiNG]
[Data] [x]
0.5, Volume Mute
(Command:
k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
TransmisSiOn [k] [e][
][Set
ID][]
[Data] [Cr]
Data 00:
Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Acknowledgemeni
[el[
][Set
iD][
][0KING]
[Data] [x]
06.
07.
08.
09.
10.
11
Volume Control
(Command:
k f)
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Transmission [k] [f] [ ] [Set ID] [ ] [Data] [Cr]
Data Min: 00 - Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. See page 9Z
Acknowledgement[f]
[ ][Set
ID][
] [OKiNG]
[Data] [x]
Contrast
(Command:
k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k] [gill
[Set ID][]
[Data] [Cr]
Data Min: O0 - Max: 64 (*transmit
by Hexadecimal
code)
_Refer to 'Real data mapping'.
See page
9Z
Acknowledgement [g] [] [Set ID] []
[OKiNG]
[Data] [x]
Brightness
(Command:
k h)
To adjust screen brightness.
You can also adjust brightness
in the PICTURE menu.
TransmisSion [k] [h] [ ] [Set lD] [ ] [Data] [Cr]
Data Min: 00 _ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. See page 9Z
Acknowledgemen_ [h][
][Set
ID][
] [OK/NG]
[Data] [x]
Color
(Command:
k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
TransmisSion [k] [i] [ ][Set
ID][
][Data][Cr]
Data Min: 00 _ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. See page 97.
Acknowledgemen_ [i] [] [set ID] [] [OK/NG]
[Data] [x]
Tint
(Command:
k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k] [j] []
[Set ID] []
[Data] [Cr]
Data Red: 00 _ Green: 64 (*transmit by Hexadecimal code)
_Refer to 'Real data mapping'. See page 9Z
Acknowledgemen_[j
1 [:] [Set ID] [ ] [OKiNG]
[Data] [x]
. Sharpness
(Command:
k k)
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k] [k] [] [Set ID] [ ] [Data] [Cr]
Data Min: 00 _ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. See page 9Z
Acknowledgement:
[k] [] [Set ID] [ ] [OK/NG] [Data] Ix]
-O
-O
m
Z
C7
X
95
Hide quick links:
Advertisement
Table of Contents
