Zenith Z42PG10 Installation And Operating Manual page 45

SIMPLINK Functions
_ Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media with-
out additional settings.
_Select AV device: Enables you to select one of the AV devices connected to TV.
Disc playback: Control connected AV devices by pressing the ^ v < > , ENTER, I_, II, I L _I_I and I_I_ buttons.
01_ Power off all devices: When you power offthe TV, all connected devices are turned off.
_Switch audio-out: Offers an easy way to switch audio-out.
Sync Power on: When you play the connected AV device, TV will automatically turn on.
(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide
this function)
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with _CEC function support should be used. (_CEC:
Consumer Electronics Control).
Display SIMPLINK menu.
Select the desired device.
Control connected AV devices.
N
-r"
z
<
N
I
>
z
z
fT1
N
©
Z
©
SIMPLINK Menu
@ TV viewing: Switch to the previous TV
channel regardlessof the current mode.
@ DISC playback: Select and play discs.
When multiple discs are available,the titles
of discs are conveniently displayed at the
bottom of the screen.
@ VCR playback: Control the connected
VCR.
@ HDD Recordings playback: Control
recordings stored in HDD.
@ Audio Out to Home Theater speak-
er/Audio Out to TV: Select Home
Theater speaker or TV speaker for Audio
Out.
_ When no device is connected
(displayed in gray)
Selected Device
When a device is connected
(displayed in bright color)
43