Advertisement
VESA Standard 200rnm W Mounts and Stands
Following are shown some examples
of VESA standard
200ram
mounts.
Since there are numerous
types of
stands
and mounts
available,
only a few are shown
here. Refer to the instructions
prodded
with the Tl/
stand that will be used to mount the T¢.
Typicat Wat[ Stud Type Mount with Swivet Bracket
200ram
t
Generat Guidetines: Choosing a location for
installing
a VESA Standard Mount
Be sure the style of stand selected
is capable
of supporting
the weight of the TE
If the mount
will be on a wall a typical wooden stud behind
the wall board would be the preferred
choice for a location
to attach
the wall mount.
The wall mount
location
chosen
should
be appropriate fgr drilling holes and have available
the required power source as well as antenna/cable
and
other equipment
leads.
For pedestaf-_pe
moun_,
a sturdy surface
on a desk or
other similar flat
table-like surface
would be the appropriate
location for mounting
a pedestal-style
W stand.
(Some
stands
are portable
and can be moved from one location
to
another.)
Be sure all safety
considerations
are followed.
Most stands are designed so that the wiring would be
threaded through the stand itse_ or a loop-through
style
clamp so that the wiring is neatly bunched and not strung in
such a way as to create a potential
hazard to the user.
PAGE
8
Advertisement
