Advertisement
DetailedDescriptions of Installer
Menu Items
035 - COMPPORTEN. (Computer Port Enable)
EnabLe/disabLes display panel HDMI input jack. Set to 0 to disable,
set to 1 to enable.
038 - YPrPb EN. (Rear Component Video Enable)
Set to 1 to enable display panel rear Component Video 1 input.
Set to 0 to disable display panel rear Component Video i input.
039 - REAR AUX EN. (Rear Aux Enable)
Set to 1 to enabledisplay panelrear AUX (Video1) input.
Set to 0 to disable disp[ay panelrear AUX (Video1)input.
040 - AUTO CAMPORT
Set to 1 to automaticaLLy switch to Camport when equipment is
connected
to front Video input.
Set to 0 to disable front Video automatic
source selection.
046 - STRT AUX SRCE (Start Aux Source)
Sets the starting AUX source.
Start source if start channel -0
1 = Video1
4 = RGB1
7 = Video 3 / S-Video
2 = Video2
5 = Component 2
255 = LastAux
3 = HDM[ 1
6 = Component 1
047 - AUX STATUS
Set to 1 for M.P.I. AUX source to be reported as a channel number
instead of channel o. Set to o to disable AUX identification
change.
ControLs M.P.I. status channel response for AUX inputs.
053 - DIS. CH-TIME (Disable Channel-Time)
Set to 1 to disable the ChanneL-Time display, ChanneL-Time display
wit[ not appear.
Set to 0 to enable the Channe[ Time display.
069 - EN. CH-T COL. (Enable Channel-Time
Custom Color)
Set to 1 to enable custom color for the ChanneL-Time display.
Set to 0 to disable custom color for the ChanneL-Time display.
070 - FOR. CH-TIME (Channel-Time
Display Foreground Color)
Set according to CoLor Chart.
0 = BLack
3 = YeLLow
6 = Cyan
i = Red
4 = Blue
7 = White
2 = Green
5 = VioLet
*Note: If foreground
and background colors are the same, menu
background is transparent.
071 - BCK. CH-TIME (Channel-Time
Display Background Color)
Set according to CoLor Chart.
0 = BLack
3 = YeLLow
6 = Cyan
I = Red
4 = Blue
7 = White
2 - Green
5 - VioLet
*Note: If foreground
and background colors are the same, menu
background
is transparent.
073 - CH NOT AVBLE (Channel Not Available)
Ifsetto i and item 028 CHANNEL OVERRIDE issetto O, "NOT
AVAILABLE" messageisdisplayed w hen directly accessing a channel
not in the channe[ scan List avaiLabLe in memory.
075 - REVERT CH (Revertto StartChannel)
Ifsetto i and Loss of M.P.I. communicationoccurs, TV automaticaLLy
tunes to the specified Start Channel
077 - QUICK SHUTOFF
ALLowsTV power offto be controLLed by the piLLow speakerchannel
selection b utton.Userwould pressand hold button clownfortime
required t o have TV turn off. VaLueRange 0 - 17,each number
represents 1/2 second.Forexample,ifsetto 4, TV would turn offif
user held speaker channel button down for 2 seconds.
078 - UPN MSB (UPN Most Significant
Byte)
User programmable number, most significant
byte readable by M.P.I.
command. Note: Not Linked to serial number.
079 - UPN MSB-t (UPN Most Significant Byte-t)
User programmable number, most significant
byte-1 readable by
M.P.I. command. Not Linked to serial number.
080 - UPN MSB-2 (UPN Most Significant Byte-2)
User programmable number, most significant
byte-2 readable by
M.P.I. command. Not Linked to serial number.
08% - UPN LSB (UPN Least Significant B yte)
Userprogrammablenumber,Least significant bytereadable by M.P.I.
command. Not Linked to serial n umber.
082 - CHKSM ERROR (Checksum Error)
Enforces rigid M.P.I. checksum validation.
Set to I forvalidation.
Set to 0 to disable (does not check checksum on M.P.I. asyncport).
SPI isalwayschecked.
083 - HANDSHK
TIME (Handshake Time)
Adds an additional delayto the handshaketime which is64 msec,
thus relaxing M .P.I. timing requirements t o be compatible with PC
based Windows controLLed systems, rangeis0 - 5.
(Timeout= 25.5F4S + [25.5MS* Handshake time]).
084 - PERMANENT BLK (Permanent Block)
ALLows Lock (Parental C ontroL) b locking schemes to be permanent by
disabling t he blocking hoursfunction.
Set to i to instaLL Parental Control restrictions permanent[y.
Set to 0 for user-specified hours control of blocking schemes.
(Continued on next page)
PAGE
50
Advertisement
