Checking The Counter, Clock And Channel Number - Zenith SLV1340S Operating Manual & Warranty

13" color tv/vcr combination,
Table of Contents

Advertisement

AUTOMATIC
TIMER
RECORDING
HINTS
• If there a power failure or the TV/VCR
is un-
plugged
for more than 10 seconds,
the clock
setting and all timer settings
are lost. At this
Lime, display
will automatically
return
to the
Clock Set mode when you choose program
set
:mode.
• [f two timer programs
overlap,
the one that
:starts first has priority. When the first program
ends, the TV/VCR
switches
to record the re-
mainder
of the second program.
• Make sure the channel
you want to record is
properly
tuned in advance.
* The erase-prevention
tab on the cassette must
be in place (or you must put tape over the hole).
Note: A cassette without
erase-prevention
tab
will be ejected when in the Timer Rec mode.
• It is not necessary
to press REC button for timer
recording.
• Recording
begins automatically
at the set Start
time.
• If you are recording
using the Automatic
Timer
Programmed,
you may not operate
the unit
manually,
but, you may still stop the recording
by pressing STOP button on the TV/VCR.
Note: STOP button on the remote control unit
will not function
in this mode.
• If the tape runs out before the end time, the
TV/VCR
will switch
to the Stop mode
im-
mediately,
and tape will be ejected.
• If a tape is not loaded
or the erase-protection
tab is removed,
the TIMER REC indicator
flashes and automatic
timer recording
cannot
occur. Press POWER button
to stop the flash-
ing. Then, load a tape that allows recording.
CHECKING
TIMER PROGRAMS
To check a program that is to be recorcled using the
Automatic
Timer Program
when the TV/VCR
is
in the Timer Record mode, turn on the TV/VCR.
Press POWER button
to exit the Timer Record
mode. Then follow instructions
in steps 2 to 5 on
page 22. Information
which was set for program
will now appear.
To see the COUNTER,
CLOCK and CHANNEL
number
on the TV screen, press the SELECT but-
ton on the remote control.
.qELECT
Each time you press the SELECT button
on the
remote control, TV screen will change as follows.
When the Closed Caption
mode is OFF:
OFF mode
,it
COUNT mode
(;LOCK mode
l-I .... 1 .[, .......
...
SP
COUNT
_224
SP
When the Closed Caption
mode is ON:
.'ach mode will disappear
after 5 seconds.
OFF mode
CLOCK/COUNT mode
sp
co;Nr
12_
- 27 -

Advertisement

Table of Contents
loading

Table of Contents