Table of Contents
Advertisement
GET TO KNOW
YOUR
REMOTE
(MBR3457)
SPECIAL
FEATURES
AUX+I, AUX+2, AUX+3
Your remote can control up to seven products, ffyou've
prograrruned
the remote for four products using the TV, VCR,
CABLE,
and AUX keys, you can program it for up to three more
by using AUX-1,
+2, +3.
To Program
AUX+I,
AUX+2, and AUX+3
_:. Locate the three-digit code for your product in the code table.
"4. Press and hold PRG until the indicator lights.
3.
Press AUX and "1" simultaneously
to select AUX+I.
4.
Enter the three-digit code, then press Et'qrER. The indicator fight
should flash, then turn off to indicate the code was accepted. If the
fight stays on. repeat steps 3 and 4 or try a different code.
5.
Repeat steps 2 - 4 for AUX+2 and AUX+3.
6. Write your codes on the label inside the battery
compartment
for future reference.
Hold down AUX and press 1, 2, or 3 to access AUX +1, +2, or +3
mode.
CABLE BOX VOLUME
Your remote can control cable box volume and muting, if
available on your cable box.
ill
To Program the Cable Box Volume
Program your cable box code into the CABLE or the AUX key.
Repeat the programming
steps, using the same CABLE or AUX
key as above, but enter special code 3--9-9, followed by ENTER.
AMPLIFIER
VOLUME
OVERRIDE
Your remote can override
your -f%t VCR, or video disc player's
volume functions with your amplifier's
volume azld muting.
To Program the Amplifier
Volume
Override
1. Program yc,ur amplifier code into the CABLE or AUX key.
2. Select the key on your remote (TV, VCR, etc.) ,,,here you
want the amplifier
volume control function to appear. For
example, press TV if you wz,nt to operate your amplifier's vol-
ume and mute while the rem,_te is in TV mode.
3. Enter special code 4-9-9, followed by ENTER.
The amplifier '_olume and mute :'eatures are now available in the TV
mode.
Notes:
[] To restore normal volume and muting control to your re-
mote, reprogram the remo_e _'orthe product into each key
(TV, VCR, etc.) to be restored.
[] CD and tape players will z.ut3matically select amplifier
volume and mute, if an arrtplifier code is pro_ammed
into
the remote.
Note: To restore TV volume/mute control to the CABLE or
_,UX key, reprogram your cable code into that key.
Advertisement
Table of Contents
