Basic Operation; Basic Playback - Zenith IQDVD2300 Operating Manual

BASIC OPERATION I PAGE 19
This section shows you the basics on how to play back a DVD video disc.
3
1
4 2
Preparations
• When you want to play back DVD video discs, turn on the TV and
select the video input source connected to the DVD video player.
• When you want to enjoy the sound of DVD video discs or audio
CDs from the audio system, turn on the audio system and select
the input source connected to the DVD video player.
• For connection details, see pages 13 through 18.
• Set the playback picture size according to the aspect ratio of the
connected TV,
• If you do not have the necessary equipment to enjoy Dolby Digital
(AC-3) sound, set the Digital Audio Output at the SETUP (Digital
Audio Output) menu to "PCM".
D Press POWER.
The DVD video player turns on and the power indicator
goes on.
B Press OPEN/CLOSE.
The disc tray opens.
• You can open the disctray by pressingthis buttonevenif the
DVD video playeris turnedoff.
B Place
a disc onto the disc
tray
with the
playback
side down.
• If the disc is placed in upside down (and it is a single sided
disc), the DVD display will indicate =NO DISC" or =DISC
ERROR".
• There are two different disc sizes. Place the disc in the
correct guide on the disc tray. If the disc is out of the guide, it
may damage the disc and cause the DVD video player to
malfunction.
• Do not place anything except 3" discs or 5" discs on the disc
tray.
Press PLAY.
D The disc tray is automatically closed and playback
begins,
Example of interactive
DVD On-Screen Menu
playback indicator
• If you insad an audio CD, the CD indicator lights up in the DVD
display.
The title number does not appear.
• After playing back all of the chapters in the title, the DVD video
player automatically stops.
When a menu screen appears on the TV screen.
In case of interactiveDVDsor Video CDs withcontrol a menuscreen
appearson the TV screen.Performstep5 on page 19 to startplay.