Table of Contents
Advertisement
_
e
e
!
II
II
•
_
II _
_
•
_
Press the MENU button
&y
To CONVERGENCE
4 t_
To Enter
&Y
To choose MANUAL
41_
To Enter
If all the lines are white, no convergence
adjustment
is
necessary.
If not, you need to perform the manual color
convergence
below.
Select the location
_ou want to adjust by using the
,
.
_
number buttons on the remote control.
You can select any of the 81 points.
(_
Press the SELECT button to change the color of the
box r _ to the color of the cross you wish to adjust (red or blue).
A'IP'41_
Adjust the position of the cross.
Adjust the three color crosses until they overlap and appear as a single white
cross.
Press the OK button
Notes:
o When you adjust the convergence,
make sure you start with the center position (position 5),
and work your way around radially for best results.
o When you make the adjustment
in the center (position 5), you are making the adjustment for
the whole screen. In other positions, you are making the adjustment only in that area.
o You can reset the adjustment
if you do not like the results. See below.
o If you perform AUTO convergence
after performing
MANUAL convergence,
your manual
convergence
you performed wilt be cancelled.
RESET resets all convergence
adjustments
to the factory default settings.
(_
Press the MENU button
&T
To CONVERGENCE
• _111_
To Enter
&_'
To RESET
41_
To enter
When the adjustment
is reset, it will return to what you were watching.
Advertisement
Table of Contents
