Table of Contents
Advertisement
Connecting
to an AV Receiver
using your
television's
V1 Smart Input
By connecting your AM Receiver to your television's Vl Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections
on your TV. This allows you to free up the other input connections
so you can
connect more devices to your television.
AV Receiver
MONITOR
OUT
TV Rear Panel
1 ) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1
on the back of your television.
2) Connect a Yellow Composite
Cable from the AV Receiver's
MONITOR OUT, into the VIDEO
INPUT-1 on the back of your television.
3) Connect a Green Component
Cable from the AV Receiver's Y MONITOR OUT, into the Y
VIDEO INPUT-1 on the back of your television.
4) Connect a Blue Component
Cable from the AV Receiver's PB MONITOR OUT, into the Pb
VIDEO INPUT-1 on the back of your television.
5) Connect a Red Component
Cable from the AV Receiver's
PR MONITOR OUT, into the Pr
VIDEO INPUT-I
on the back of _our television.
Note:
• Please refer to your AM Receiver instruction manual for more information on connecting your
speakers and other devices like a DVD player.
• Use your AV Receiver's
remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the Vl Smart Input function is turned on.
• If you have video connections
for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite
connection at the same time
when you are using Vl Input as the VI Smart Input.
In this case we recommend
using the
S-Video connection.
Advertisement
Table of Contents
