Epson Stylus Color 640 Service Manual page 143

EPSON Stylus Color 440/640/740
[Clearing the current protection counter value]
1. Enter the main menu. (Refer to Section 5.2.2.2 )
2. Apply the maintenance menu.
3. By using the Up/Down arrow key, select the item Indication of the
counter value for the waste ink pad in the maintenance menu
(Figure 5-12). The Current Protection Counter Conformation (1)
Screen shown in Figure 5-15 appears.
4. By using the Up/Down arrow key, select the Clear the protect
counter value on the screen. The screen shown below appears.
Figure 5-17. Current Protection Counter Clear Screen
Chapter 5 Adjustment
5. Press the Enter key while the reverse cursor is indicating Already
replaced. The screen below appears.
Figure 5-18. Zero Clear of Protect Counter Value


Be sure to replace the installed waste ink pad with a
new one after or before you clear the current
protection counter value.


If you select Have not
automatically returns to the previous screen (Figure
5-17).
Revision A
replaced, the current screen
143