EPSON Stylus Color 440/640/740
[For Stylus Color 440, 640]
1. Remove the housing. (Refer to Section 4.2.1.)
2. Remove the absorber tray assembly ;A. (Refer to Section 4.2.4.2.)
3. Remove the 2 screws securing the PF motor assembly. to the
frame.
When disassembling the PF motor assembly, pull the
motor assembly out of the frame a little bit and
remove it, sliding it into a larger hole in the frame.
(Refer to Figure 4-14.)
Be careful of the direction of the wires from the PF
motor assembly.
Do not damage or mar the grooves in the gears
during the disassembly and assembly.
Chapter 4
Disassembly and Assembly
Figure 4-14. Removing the PF Motor Assembly
(Stylus Color 440, 640)
Revision A
118