EPSON Stylus Color 440/640/740
4.2.4.2 Removing the Absorber Tray Assembly ;A
1. Remove the housing. (Refer to Section 4.2.1.)
2. Remove the operation panel. (Refer to Section 4.2.3.)
3. Remove one screw (No.4) securing "Absorber tray assembly"
located on the right side of the printer mechanism.
4. On the right side of the printer mechanism, release the hook
securing the "Absorber tray assembly ;A" to the frame and remove
it, pulling it downward.
When installing the absorber tray assembly ;A, make
sure to fix it with the spacer tray in the left side of the
printer mechanism.
Chapter 4
Disassembly and Assembly
Figure 4-8. Removing the Absorber Tray Assembly ;A
Revision A
112