System Connections - JVC GR-HD1 Instructions Manual

SYSTEM CONNECTIONS
| Connection ToA Personal Computer
[A] Using USB cable
To USB
[B] Using LLINK cable
To USB connector
USB cable (provided)
OR
EN 57
PC
i.LINK cable To I.LINK
(optional) connector
Fo I.LINK IN/OUT
PC with i.LINK
connector
[A] Using USB cable
It is possible to do the following things:
• Transfer still images stored on a memory card to a
PC.
• Use this camcorder as a WebCam. (r_ _ pg. 68)
[B] Using i.LINK cable
It is also possible to transfer still/moving images to a
PC with an i.LINK connector by using the provided
software, software equipped with the PC or
commercially available software.
NOTES:
• Refer to "SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE" for the installation of the
bundled software and drivers.
• The software operation manual is provided as PDF
file on the CD-RC)M.
• It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (__ pg. 13)
• Never connect the USB cable and the i.LINK
cable simultaneously to the camcorder. Connect
only the cable you wish to use to the camcorder.
• When using an LLINK cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U
i.LINK cable depending on the type of i.LINK
connector (4 or 6 pins) on the PC.
• If the PC connected to the camcorder via the USB
cable, is not powered_ the camcorder does not
enter the USB mode.
• The date/time information cannot be captured into
the PC.
• Refer to the instruction manuals of the PC and
S_fftware.
• The still images can also be transferred t_) a PC
with an i.LINK connector-equipped capture, board.
• The system may not work properly depending on
the PC or capture board you are, using.
"USB MODE" and/or "ACCESSING FILES"
appears on the LCD monitor while the PC is
accessing data in the camcorder or the camcorder
is transferring a file to the PC.
NEVER disconnect the USB cable while
"ACCESSING FILES" is displayed on the LCD
monitor since this can result in product damage.