Panasonic SDR-S7PC Operating Instructions Manual page 65

Connect the AC adaptor provided with the DVD burner to the DVD burner.
Connect the unit and AC adaptor (R20) and set the mode dial to a position
other than [OFF].
_--3_ Connect this unit and the DVD burner with the mini AB USB connection
cable.
_4) Insert a disc into the DVD burner.
• Once connected, the [DVD BURNER] display
appears on the LCD monitor of the unit. If it
does not appear, reconnect the mini AB USB
connection cable.
• First connect the DVD burner to the unit, and
[DVD BURNER] display then insert the disc.
oUse the mini AB USB connection cable that comes with the DVD burner (sold
separately). Operation is not guaranteed with other cables.
oConnect the unit directory to the DVD burner without going through a USB
hub.
oEnsure without fail that only the AC adaptors designed solely to be used with
the unit and DVD burner are connected. Power cannot be supplied from the
unit to the DVD burner using a USB connection. While powered by the battery,
the unit and DVD burner cannot be connected for use.
olf the DVD burner is connected to this unit with a disc already inserted, the
message "CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE
USB CABLE FROM THIS UNIT." may be displayed after "Please Wait." is
displayed for over a minute. When this happens, disconnect the Mini AB USB
Connection Cable from the unit and remove the disc from the DVD burner to
make sure the disc is usable and was not inserted upside down.
olf "READING DISC..." is displayed on the screen for more than 2 minutes,
remove the disc from the DVD burner and make sure the disc is usable and
was not inserted upside down.
VQT1R00 65