Quick Starts - Panasonic SDR-S7PC Operating Instructions Manual

Quick starts are available when the mode is set to [_] and [1_11].
When [QUICK START] is [ON], the unit responds as follows to LCD monitor
operations:
When opened Shooting can start in approx. 0.6 second. Lit red
When closed The unit goes on quick start standby*. Flashing green
The unit consumes about half as much power as when recording is stepped.
• Setting [QUICK START]
gs from the
menus. (P.26)
M(_)U _[S ETU P]_
[QUICK START]_[ON]
(To turn OFF, select [OFF].)
• [QUICK START] is [ON] at the time of purchase.
oThe quick start standby is canceled and power shuts OFF (status indicator
out) in the following situations.
• When quick start standby mode continues for more than about 5 minutes
• When the mode dial is rotated
oWhen white balance is set to [I-A-_-_I],quick starts require more time if the light
source differs from that prior to quick starting, because automatic adjustments
are performed. (However, automatic adjustments are not performed when
using the MagicPix function.)
oStarting may require more time than usual if the unit is impacted.
oZoom magnification becomes lx after quick starts.
olf [POWER SAVE] (P.84) is set to [5 MINUTES] and the unit automatically
goes on quick start standby, close and reopen the LCD monitor.
VQT1R00
25