Panasonic Palmcoder SDR-H40PC Operating Instructions Manual page 105

Ii function indication 1
uch as the remaining
ime indication or the _,
lapsed time indication is
ot shown.
Recording does not start
although power is
supplied to this unit.
itecording starts but 1
ops immediately. _@
he playback picture
reaks up for a moment.
ITthe operation arbitrarily
ops. _ _@_
f
Recording stops
suddenly during motion
picture recording on an
SD card.
Recorded still pictures
are not clear. _,_> _,,
AUto focus function does _
ot work. J
• If you set [SETUP]--_[DISPLAY]--_[OFF]. indications other
than warnings and date are not displayed
• No recording Js possible while the SD card's write protect
switch is set to LOCK. (_ 23)
• If the HDD or SD card has no more available memory, free
up some memory by deleting unnecessary scenes (-_ 59)
or use a new SD card
• Is the unit set to the video recording mode or picture
recording mode?
• f the SD card slot cover is open, this unit may not operate
normally. Close the card slot cover.
• The unit is hot. Follow the messages on the display. To use
the unit again, turn the unit off and leave it for a while.
• If the recording stops when the HDD is used. back up the
data on the HDD to a PC. etc. and then format the HDD.
(4 71)
• The drop detection function has activated to protect the
HDD. Do not drop or shake this unit while operating it.
• Use an SD card that can be used for motion picture
recording. (4 24)
• When using an SD card on which data has been written
many times and the data writing speed has reduced, the
recording may suddenly stop during motion picture
recording. Back up the data on the SD card to a PC. etc.
and then format the SD card. (-_ 71
• If you try to record small or finely detailed objects with
[PICT.QUALITY] set at [=k], the images may break up into
a mosaic-like pattern. Record with [PICT.QUALITY] set at
[=|I] instead. (4 391
• Press the AUTO button
• There are some recording subjects and surroundings for
which the auto focus does not operate correctly. (4 112) If
so, use the manual focus mode to adjust the focus. (-_ 50)
105
LSQT1337