Panasonic HDC-TM55P Operating Instructions Manual page 52

Id"t_FJf_
f
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
em other than the !
uched one is _, _ _,
elected.
/The remaining time
indication or the
elapsed time
indication is not
shown.
\
fThe unit arbitrarily
stops recording.
uto focus function
oes not work. / _,_
J
• Remove the battery or AC adaptor, wait about
1 minute and then reconnect the battery or AC
adaptor. Then about 1 minute ater. turn on the power
again. (Conducting the above operation while the
media is being accessed may damage the data on
the media.)
• If normal operation is still not restored, detach the
power connected, ant contact consumer support.
(,,,,) 152, 153)
• Calibrate the touch screen. (-) 49)
• [DISPLAY] of the [SETUP] is [OFF]. (-) 441
• Use an SD card that can be used for motion picture
recording. (-.) 26)
• The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Using the unit, format the SD
card. built-in memory or HDD. (-) 48)
• If [AGS] is [ON], record in the normal horizontal
position or set lAGS] to [OFF]. (-) 66)
If the unit is exposed to strong vibrations or shocks
while recording on HDD. recording may stop to
protect the HDD. If the unit is used in a place with
loud sounds, the recording may stop due to sound
vibrations. Recording data on an SD card is
recommended in these places.
• Switch to Intelligent Auto Mode.
• If you are trying to record a scene which is hard to
bring into focus in Auto Focus Mode. use the Manua
Focus Mode to adjust the focus. (-) 39, 77)
128
VQT2M51